Model: Intel PWLA8492MT
Features
- Easy, cost-effective10/100/1000 migration over CAT-5 cabling
- Multi-Gigabit scalability and increased uptime through advanced server features
- Optional low-profile bracket included for high-density, rack-mounted servers
Specifications
Product Codes: PWLA8492MT
Connectors: Two RJ-45
IEEE Standard/network Topology: 10BASE-T, 100BASE-TX, | 1000BASE-T
Wiring: Cat-5, 4-pair
Adapter Product Features
Intel Singledriver Technology: Yes
Plug And Play Specification Support: Standard
Easy Installation, Intel Proset Utility And
Intel Pro Intelligent Install: Yes
Auto-negotiation, Full-duplex Capable: Yes
Includes A Low-profile And A Full-height Bracket: Yes
Cable Distance: 100m
Network Management Wired For Management (wfm) Baseline V2.0 Enabled For Servers: Yes
Dmi 2.0 Support, Wmi & Snmp-manageable: Yes
Offline Diagnostics: Yes
Dynamic Cable Diagnostics: Yes
Intel Boot Agent: Yes
Acpi Power Management: Yes
Wake On Lan: Yes
Pxe 2.0: Yes
Nos Software Support
Microsoft Windows Server 2003 And 2000: Yes
Microsoft Windows Xp 32- And 64-bit Editions: Yes
Microsoft Windows Nt 4.0: Yes
Linux 2.4.x Or Later (32- And 64-bit): Yes
Freebsd 4.x Or Later: Yes
Novell Netware 4.11, 4.2, 5.0, 5.1, 6.0: Yes
Sunsoft Solaris 7, 8: Yes
Unixware 7.x, Openunix 8 (ddi8): Yes
Sco5: Yes
Advanced Software Features
Adapter Fault Tolerance: Yes
Switch Fault Tolerance: Yes
Adaptive Load Balancing: Yes
Fast Etherchannel 1: Yes
Gigabit Etherchannel 1: Yes
Ieee 802.3ad (link Aggregation Control Protocol) 1: Yes
Test Switch Configuration: Yes
Pci Hot Plug And Active Pci: Yes
802.1q Vlans: Yes
802.3x Flow Control: Yes
Tcp Checksum Offload: Yes
Tcp Segmentation/large Send Off-load: Yes
Interrupt Moderation: Yes
Save And Restore: Yes
Technical Features
Data Rate(s) Supported Per Port: 10, 100 and 1,000-Mbps
Bus Type: PCI/PCI-X
Bus Width: 32- or 64-bit
Bus Speed (mhz): 33/66/100/133
Onboard Memory: 128 KB
Interrupt Levels: INTA
Ieee Support: 802.3ab
Hardware Certifications: FCC A, CE
Data Transfer Mode: Bus-master DMA
Controller-processor: Intel 82546
Typical Power Consumption: 1A at +5VDC
Operating Temperature: 0-55*C
Operating Humidity: 85% at +55*C
Dimensions
Length: 16.5cm (6.6 in)
Width: 6.4cm (2.5 in)
Height Of Full-height End Bracket: 12.1cm (4.75 in)
Height Of Low-profile End Bracket: 8.1cm (3.2 in)
Two Gigabit Copper Server Connections in a Single PCI Slot
The Intelligent Way to Connect
Conserve valuable PCI slot space in servers, eliminate server bottlenecks and migrate existing Category-5 networks to Gigabit Ethernet easily and cost-effectively with the Intel PRO/1000 MT Dual Port Server Adapter. Featuring flexible, auto-negotiating 10/100/1000 Mbps performance, the Intel PRO/1000 MT Dual Port Server Adapter is designed to automatically scale with growing networks.
Enhance server performance further by teaming the two connections together or team with other Intel PRO Server Adapters using Intels advanced server feature software to achieve multi-Gigabit scalability and redundant failover capability. A compact form factor and swappable lowprofile bracket allow this dual port Gigabit adapter to fit in even high-density, rack-mounted 1U and 2U servers. With a flexible design that fits almost any type of PCI bus, the standards-based management features and wide network operating system support help to ensure extensive compatibility with the latest server and networking environments.
